7
[Using the stopwatch]
– This is a stopwatch that measures up to 60 minutes in 1/5th second increments.
This stopwatch stops automatically after running 12 hours.
– Measurement is shown by the stopwatch second hand in the center and the
stopwatch minute hand at the 12 o’ clock position.
– It also comes with the function of split times.
• Reading the stopwatch
Read the time elapsed with two stopwatch hands (stopwatch second hand, stop-
watch minute hand).
Stopwatch
minute hand
Stopwatch second
hand
48 minutes 10
seconds 2
<The 0 position of stopwatch hand>
– In case that the stopwatch hand does not return to a 0 position even if it is
reset, it becomes necessary to perform 0-position setting.
– Carry out the 0-position setting of the stopwatch concurrently with the
time setting of the basic watch.
Refer to [◆ Time Setting/0-Position Setting of Stopwatch Hands].
To Next Page
Loading...
