Oriental motor DRL Series - System Configuration

14
Compact Linear
Actuator Driver
DRL Series
(Connected by the
customer.)

System Configuration

Built-In Controller Type
An example of a configuration using I/O control or RS-485
communication is shown below.
Programmable
Controller
✽2
(For RS-485 communication)
The cables used in the EMC
Directive evaluation.
Connection Cable (Extension)
(
➜ Page 54)
Accessory (Sold separately)

System Configuration Example
DRL Series
Sold Separately
Control Module
Connection Cable
(Extension) · 5 m
Installation Plate
DRL42-04A2P-KD OPX-2A CC05PK5 PADRL-42

The system configuration shown above is an example. Other combinations are available.
24 VDC Power
Supply
✽2
Computer
✽1 ✽2
To USB
Port
Installation plate
(
➜ Page 51)
Connection cable
(➜ Page 54)
RS-485 communication cable
(➜ Page 55)
Accessory (Sold separately)
Data Setting Software
MEXE02
✽3
Network converter
(
➜ Page 56)
Related Products (Sold separately)

User's Manuals are available that describe the operation methods for these products. For details, please contact the nearest Oriental Motor sales office, or download from the Oriental Motor website.
http://www.orientalmotor.eu
Control module
(
➜ Page 52)
Data setting software
communication cable
(
➜ Page 53)
Accessory (Sold separately)
✽1
or
Limit Sensors
✽2
✽1 Required for I/O control drive.
✽2 Not supplied.
✽3 The data setting software can be downloaded for free from the Oriental Motor website.