Oriental motor DSC Series - Operation Panel Navigation

Function
−26−
7.2 Operation panel transitions
Monitor mode
Top screen
Data mode
Return to the
"warning record 1"
Return to the
"rotation speed 0"
Return to the
"alarm record 1"
Rotation speed
monitor∗1
Operation
data No.
Alarm
Alarm record
1 to 9
Data
setting
Data
setting
Execute
∗2
Rotation speed
teaching function
Clear alarm
records
Warning record
1 to 9
Clear warning
records
Alarm
reset
Warning
Operation
data No.0
Return to the
"rotation speed"
Return to the
"input monitor"
Input monitor
Output monitor
External DC
voltage monitor
I/O
Acceleration
time 0
Deceleration
time 0
Initialization
0
Operation
data No.3
Return to the
"operation data No.0"
Rotation
speed 0
Data
setting
Return to the
"rotation speed 3"
Data
setting
Data
setting
Execute
∗2
Acceleration
time 3
Deceleration
time 3
Initialization
3
Rotation
speed 3
Data
setting
Power ON
Change the rotation speed with while lit.
(The motor rotates when the FWD input or REV input is being ON.)
To the monitor mode
Power ON
• When turning on the AC power supply, the POWER LED (green) is lit.
• When turning on the DC power supply, the display on the operation panel is lit.
∗1 When the speed reduction ratio or speed increasing ratio is being set, the converted speed is displayed.
∗2 The setting change or execution is not possible while operating the motor. " " will be displayed.
• If operations are limited by the edit lock function, the screens in gray color are not displayed.
• The display blinks in the data setting screen. If is pressed after changing the setting, the display blinks fast (a few times) and
the new setting will be determined.
Execute
Only when
an alarm
presents