© 2020 Forty Four Group, LLC., d/b/a Origaudio
Printed in California ∙ Made in China
CHARGING
Charging the Temblor speaker:
1. Plug the provided charging cable into the micro USB port and connect to a power source on the other
end. The LED indicator light ④ will blink red, signaling that the Temblor speaker is charging.
Charging your phone wirelessly with the Temblor speaker:
NOTE: Before attempting to charge your phone, make sure it is wireless charging-compatible. Also, some
phone cases may block wireless charging.
1. Plug the charging cable into the micro USB port and connect to a power source on the other end.
2. Put your wireless charging-enabled device on the wireless charging output area ①.The wireless
charging LED indicator light ③ lights up green once your phone is successfully charging.
CHARGING POINTERS
• Temblor’s built-in battery only supports the power supply of the speaker. The wireless charging feature
of the Temblor needs external power supply for it to function.
• To use the wireless charger & speaker functions at the same time, connect Temblor to an external
power supply and power Temblor on.
• Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the
mobile device and the wireless charging area.
• Your mobile device may not charge properly if it is not placed on the charging area accurately.
ADDITIONAL INFORMATION
• Avoid using this product in a high frequency environment to avoid interference with calls.
• If you are having trouble connecting your Temblor, forget/delete the device (”Temblor Speaker”) from
your list of wireless devices and then try reconnecting.
• Sound quality can be affected if Temblor is low on battery or if it is in a poor signal environment. If this
occurs, move the product to an environment with strong signal or charge Temblor.
• Be careful not to expose Temblor to moisture or heat sources.
SPECIFICATIONS
Battery: Lithium-Polymer / 600mAh
Speaker Output: 5W
Operating Distance: Up to 33 feet (10 meters)
Product Size: 4.86 x 2.24 x 3.41”
Wireless Charging Coils: 1 piece
Input: DC5V-2A
Wireless Output: 5W (Max.)
Material: Cement + ABS + Bamboo
Accessories: Micro USB charging cable and instruction manual
To Previous Page
Loading...
