Origin 21 LWS35KCR - Page 8

8
ASSEMBLY INSTRUCTIONS
7
8
9
7. Attach left back post (B), left front post (C), upper stretcher
(F), upper side stretcher (G), right back post (D), right front
post (E) to top panel (A), using wood dowels (CC) and cam
locks (BB).
9. Using allen wrench (KK) and 1/4” x 15 mm sala bolt (HH)
to tighten handle(N) on left back post (B), left front post(C),
right back post (D), right front post (E).
All expose cam lock holes covered with PVC cover (JJ)
8. Intall caster (O) and caster with brake (P) into the bottom
of post T- nut.
Using allen wrench (KK), 1/4” x 15 mm bolt (EE), 1/4” lock
washer (FF), 1/4” at washer (GG) to tighten shelf (J) on the
post.
HH
KK
JJ
FF GG
EEKK
CC
BB
B
G
A
N
O P
J
D
E
F
E
C
Hardware Used
Hardware Used
BB
CC
Cam Lock
Wood Dowel
x 10
x 8
C
D
B
EE
FF
GG
HH
KK
1/4”x 15 mm Bolt
1/4” Lock Washer
1/4” Flat Washer
1/4”x 15 mm Sala Bolt
Allen Wrench
x 4
x 4
x 4
x 8
x 1
Hardware Used
JJ
PVC cover
x 26
KK
Allen Wrench
x 1