scratches to your boat while adjusting and measuring your tower
attachment points.
Step 2
First assemble the tube joints on the bottom bars. You will not be
drilling any holes in the tower at this point. TIP: You can use
Petroleum Jelly (Vaseline®) to grease the rubbers of the tower
tube joints to prevent the rubbers from drying and it helps to
insert the tower tube joints easily.
Always apply a thin film of Anti-Seize lubricant on all the male
threads of the stainless steel hardware. This prevents the stainless
steel hardware from galling and locking. Frequently check/tighten
the screws regularly before use.
To Next Page
Loading...
Need help?
General