Orion LCD T22-DVDC - Sound Adjustments and Features; Balance, Headphone, and AVL; Audio Effects and Outputs; Feature Menu

English - 73 -
Balance
This setting is used for emphasizing left or right
speaker balance.
Press “
” or “ ” button to select Balance.
Press “ ” or “ ” button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.
Headphone
Press “
” or “ ” button to select Headphone .
Press “ ” button to view the headphone
menu.
Note: Headphone will be disabled when SPDIF option
is set to on.
Headphone sub-menu options are described
below:
Volume
Press “
” or “ ” button to select Volume . Press
“ ” button to increase headphone volume
level. Press “ ” button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press “
” or “ ” button to select AVL . Press “ ”
or “ ” button to set the AVL as On or Off .
Spdif Out
Press “ ” or “ ” button to select Spdif Out .
Press “ ” or “ ” button to set the Spdif Out .
as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.
SRS TruSurr XT (optional)
By pressing “
” or “ ” select SRS TruSurr XT .
Press “ ” or “ ” button to set SRS TruSurr XT
as on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
Dolby Virtual Speaker (optional)
This feature is used to create the impression that
sound is coming from around the room instead
of the set speakers. Pressing the “ ” or “ ”
buttons will turn the feature on or off.
Note: If you set Dolby Virtual Speaker as On, some
features in the Sound menu can be unavailable to
be set.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press “
” or “ ” button to select Effect. Press
“
” or “ ” button to set as On or Off .
Store
Press “ ” or “ ” button to select Store.
Press “ ” or OK button to store the settings.
“ Stored... ” will be displayed on the screen.
Feature Menu
Sleep Timer
Press “
” or “ ” button to select Sleep Timer .
Use “ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press “
” or “ ” button to select Child Lock .
Use “ ” or “ ” button to set the Child Lock On
or Off . When On is selected, the TV can only be
controlled by the remote control handset. In this
case the control panel buttons will not work.
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.
02_MB25_(SSM) [GB]_ (01-TV)_22875W_1900UK-ANALOG-NICKEL5-10061913_50143494.indd 2102_MB25_(SSM) [GB]_ (01-TV)_22875W_1900UK-ANALOG-NICKEL5-10061913_50143494.indd 21 25.02.2009 15:33:4625.02.2009 15:33:46