Orion MIS-4220 - 4. How to Connect Cables; 4.1. Connection of One Set MPDP

16
MIS-4220 / MIS-4220R / MIS-4230
17
Infinitely Expandable



MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a y
MPDP is connected with supplied RS-232C cable.
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control y
System).
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to y
control MPDP with a PC.
If you do not have Com Port, you need to use an USB converter for RS-232. Depending y
on manufacturers or models, converters may cause malfunction.
PC
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C
VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN
OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
[PDP ID 1]
ID switch must be set as ID 1 y
for one set use.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
PC (MSCS) to control MPDP
RS-232C (Maximum 15m)
PC- analog connection (Maximum 5m)
DVI connection (Maximum 5m)
※ If you need longer connection, please use
DVI boosters or DVI fiber-optic cable.
Downloaded From TV-Manual.com Manuals