3
LED Digital Display
Operation
Press the button labeled Menu to select a function, for detailed description please see the “OPERA-
TION MENU” section of this Manual. Press the button labeled Up or button labeled Down to modify
values. Press the button labeled Enter to save your settings.
LED Digital Display Operation Menu
When powered up, the unit will display its previous settings when last used. The LED digital display will
stay on for about 20 seconds if there is no button being pressed. After 20 seconds, if there is no DMX
present, the rst dot of the display will be illuminated; if there is DMX present, the rst dot will blink on/off.
Primary-Secondary: The Primary light can choose any mode of Auto/Soun modes. The secondary light is
set as A001. Only one light can be used as the primary. No more than 10 lights can be linked together.
FUNCTION DISPLAY
DMX
Y
SECONDAR
SOUND
To Next Page
Loading...