i
IMPORTANTSAFETY INSTRUCTIONS
CAUTION: TO REDUCE THERISKOF ELECTRIC SHOCK, DO NOT REMOVE THECOVER ON THIS LIGHT. THEREARE NO
USER-SERVICEABLE PARTS INSIDE. REFERALL SERVICING TO AQUALIFIED TECHNICIAN.
NEVER look directly at thelaser emitterasserious eyeinjurycan occur.
This symbol indicatesthatthere is laserradiation emitted from this unit.
Thelightning flashwitharrowhead symbol within an equilateral triangle is intended to alert theusertothe presence of
"dangerous" voltagewithinthe product's enclosure that maybeofsufficient magnitude to constitute ariskof electric shockto
humans. Usersshould exhibitextra safety when this symbol appearsin this instructionmanual andfollowall precautions as they are
stated.
1. Read theseinstructions thoroughlybeforeusing this item. Heed allwarnings. Follow allinstructions.
2. Disconnect from thepower source before servicing.
3. REPLACE FUSE WITH SAME TYPE ANDRATING.
4. This product is forindooruse only!Toprevent fire or electric shock, do not expose this equipment to rain or moisture.Donot store
or operatethisproduct near anyliquids.
5. Do not storeoroperate this product near anyheat sourcessuchasradiators,heat registers, stoves, or other apparatus(including
amplifiers)that produce heat.
6. Do not defeat thesafetypurpose of thepolarized or grounding-type plug.
Apolarized plug has twobladeswithone wider than the
other. Agrounding plug has twobladesand around grounding prong. Thewideblade or thirdprong is provided foryoursafety. If the
provided plug does not fityour outlet, consultanelectrician for thereplacement of theobsoleteoutlet.
7. Protect allwires connected to this unit from beingwalkedonorpinched, particularlyplugs and thepoint wheretheyexit from the
unit.Whenremovingthe cord from thepower outlet,removeit by holding theplugnot by pullingthe cord.
8. Unplug theunit during lightningstormsorwhen unused forlong periodsof time.
9. Allow theunit to cool down after1or 2hours of continuous operationtoprevent heat stress damage.
10.Whenwiringthisunit andall other equipment used in connection to this unit make sure that allof your equipment is turned OFF.
11.Makesure thedistancebetween the fixtureand thelighted objectisnot less than 0.5meters. Keep combustibleand/orexplosive
materialsaway from this unit.Donot blockthe ventilation slots.
12.Inthe event of aserious operatingproblem,stopusing theunit immediately. Never trytorepair theunit by yourself. Repairs
carried out by unskilled people ca
nlead to damage or malfunction. Please return theunit to thenearest authorized technical
assistancecenter.
13.The unit should neverbeconnected to anykindofexternalACdimmer. Operateonlyatintendedvoltage.
14.Makesure thepower cord is neverpinched or damaged.
15.Never disconnect thepower cord by pulling or tuggingon thecord.
16.Never carry thefixture directly from thecord. Always usethe hanging/mounting bracket.
17.Beforeplacing, installing, rigging, or suspending anyproduct,inspect allhardware, suspension,cabinets, transducers, brackets
andassociated equipment fordamage. Anymissing,corroded, deformed, or non-loadrated componentcould significantlyreduce the
strength of theinstallation, placement or array. Anysuchcondition severely reduces thesafetyof theinstallation and should be
immediatelycorrected. Useonlyhardwarewhich is rated forthe loadingconditionsof theinstallationand any possibleshort-term,
unexpected overloading. Neverexceedthe rating of thehardwareorequipment.
18.ALWAYS useasafety chainorcable betweenthe unit andoverheadsuspension trusstoensuresafetytopersons.
19.Consult a licensed, Professional Engineer regarding physicalequipment installa
tion. Ensure that alllocal, state and national
regulationsregarding thesafetyand operationof equipment areunderstood andadhered to.
20.Refer allservicing to qualifiedservice personnel. Servicingisrequired when theapparatushas been damagedinany way, such
as powersupply cord or plug is damaged, liquidhas beenspilled or objectshavefalleninto theapparatus, theapparatus has been
exposed to rain or moisture,doesnot operatenormally, or hasbeendropped.
To Next Page
Loading...