Orion TV19PL110D - Station Presetting and Organization; Automatic Station Presetting; Channel Order Customization

13
Automatic station presetting with the built-in Tuner/
Changing the order of stored channels
Automatic station presetting with the built-in Tuner
Perform this feature to search for and store new analogue TV
programmes after the Automatic installation. (P.11)
Preparation:
Make sure your antenna is connected to the antenna input (see
P.10). Press 1 to switch to channel1 to begin with.
1
Select AUTO TUNING, then press
ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Select COUNTRY, then press ENTER.
Press
or to select your country,
then press ENTER.
COUNTRY
START
UK
UK
3
Select START. Then press ENTER.
The automatic tuning will search for available broadcasts
and should store the channels in the correct order. During
the search the sound is muted. When all programs have
been stored, the normal TV screen will appear.
Changing the order of stored channels
The Automatic station presetting stores the stations in a specific
order. However, this order can be changed if you wish.
1
Select CH ALLOCATION.
Then press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Select desired option, then press
ENTER.
SORT
ERASE PROGRAM
SKIP
CH LABEL
3
After setting the each option, press ANALOG MENU to
return to CH ALLOCATION memu.
4
Press EXIT to return to the normal screen.
Description about the each setting option:
SORT: Press
or to select the channel that you want to
move, then press ENTER.
Press
or to select the position that you want to move the
channel to, then press ENTER.
ERASE PROGRAM: Press
or to select the channel that
you want to erase, then press ENTER.
SKIP: Press
or to select the channel that you want to
skip, then press ENTER.
mark will appear.
CH LABEL: Press
or to select channel that you want
to rename, then press ENTER. Press
or to select
character, then press
or . The cursor will move to the next
position. Press ENTER to set the channel label.
Note:
To restart digital auto tuning, see
page 23.
When the COUNTRY is set to UK,
the automatic tuning will search for
UHF broadcasts only.
When changing the order of the
channels, it is best to start with Ch1.
•
•
•
32G0146B_ENG.indd 1332G0146B_ENG.indd 13 10/11/07 1:52:18 PM10/11/07 1:52:18 PM