37
Connection to other equipment
6. Setting of Scart socket
1
In , select AV1 OUTPUT, then press ENTER.
2
This determines whether the AV1 outputs the signal from the internal
tuner or whatever input is shown on the screen.
Press
or to select TV or MONITOR.
TV: Outputs the last channel position selected.
MONITOR: The picture displayed on TV-screen
AV1 OUTPUT
AV COLOUR
TV
AUTO
REC SCREEN STATUS
OFF
TV
3
Press EXIT to return to the normal screen.
AV colour adjustment
The AV Colour setting only applies when viewing
devices connected to the AV inputs.
1
In , select AV COLOUR, then
press ENTER.
2
Press or to select AUTO.
AV1 OUTPUT
AV COLOUR
AUTO
AUTO
REC SCREEN STATUS
OFF
TV
3
If AUTO option does not work, press or to select
desired colour (e.g. NTSC 3.58).
4
Press EXIT to return to the normal screen.
Note:
PAL is the colour system used in Germany. NTSC 3.58 is
used in the USA, PAL 60 used in Germany handled video
recorders, which play NTSC video tape recording.
If the picture shows horizontal stripes:
Set to AUTO as the description above.
•
32G0146B_ENG.indd 3732G0146B_ENG.indd 37 10/11/07 1:52:34 PM10/11/07 1:52:34 PM
To Next Page
Loading...
