68
Dismantling th e bicycle carrier
First relea se the locking bolt behind the registration plate
holder.
To dismantle the bicycle carrier, proceed in t he reverse
order to fitting.
Cleaning and care
The bicycle carrier can be cleaned with a mild cleaning
agent, w it h warm water and/or a soft cloth.
First remove any coarse dirt and dust. Do not use any
solvents or similar cleaning agents, since these can
damage the bicycle carrier.
Leave the bicycle carrier to dry on its own. Do not use any
electrical driers or other heating equipment to speed up
the drying process.
Clean the bicycle carrier regularly when used in coastal
areas or in winter conditions in order to wash off any salt
and prolong the service life of the bicycle carrier.
Store t he bicycle carrier in a dry and protected area when
not used for extended periods (e.g. over winter) in order to
prolong the service life of the bicycle carrier.
Dismantling / cleaning
Carrying the bicycle carrier without the
transport bag
Stowing the bicycle carrier in the
transport bag
To Next Page
Loading...
Need help?
General