Orsan OPS SS 3000-2H - User Manual

Sayfa / Page 0 www.orsanops.com
www.orsanops.com ● info@orsanops.com
ISO 9001:2000
Kalite Yönetim Sistemi
Quality Management System

Summary

Safety Rules

Ordering Repair Parts

Putting into Service

Operation

Maintenance

Lubrication and Preparing for Operation

Instructions for cleaning, lubricating, and preparing the machine for use.

Needles

Operating Instructions

Threading

Procedure for threading the machine's needles and loopers.

Operating

Steps for starting and running the sewing machine.

Changing the Needle

Instructions on how to safely replace a sewing needle.

Setting the Looper(s)

Detailed steps for adjusting the looper mechanism.

Setting the Height of Needle Bar

Setting the Lower Feed Dog

Mounting and Setting the Presser Foot

Setting the Stitch Length

Alternating Upper Feed Dog and Presser Foot

Torque Requirements

Thread Tension, Thread Guides - Single Needle

Thread Tension, Thread Guides - Double Needle

Looper Lever and Rocker, Looper Thread Cast-off - Single Needle

Looper Lever and Rocker, Looper Thread Cast-off - Double Needle

Feed Mechanism

Upper Feed Dog Transport Connections

Presser Bar, Presser Bar Springs and Presser Foot Lifter Lever

Numerical Index of Parts

Orsan OPS SS 3000-2H Specifications

General

Type	Overlock
Application	Industrial
Needle system	DCx27
Needle Count	2
Thread Tension	Manual
Machine Weight	35 kg
Stitch type	Overlock
Differential Feed	0.7-2 mm
Power Requirements	220V