Need help?Do you have a question about the ORTEC trans-SPEC-DX-100 and is the answer not in the manual?
General| Brand | ORTEC |
|---|---|
| Model | trans-SPEC-DX-100 |
| Category | Laboratory Equipment |
| Language | English |
Details the quality control tests for instruments before shipment.
Outlines the procedure for returning instruments for repair, including contact info.
Advises on handling shipments that may be damaged and filing claims.
Steps for powering on and preparing the instrument for use.
Describes the P-type and N-type HPGe detectors used in the trans-SPEC.
Lists the key capabilities and functionalities of the trans-SPEC.
Explains the optional GPS and wireless connectivity features.
Details user and administrator password protection and display locking.
Explains how the live spectrum is stored in memory.
Details how to save and manage acquired spectra.
Describes the standard format for spectrum filenames.
Outlines methods for transferring spectrum files to a computer.
Instructions for unpacking and initial setup of the instrument.
Overview of the trans-SPEC's physical features.
Describes the components and controls on the front panel.
Details the rear-panel connectors for power and data.
Explains the operation and interface of the color LCD touchscreen.
Instructions for attaching the carrying strap.
Describes the connectors and status indicators on the docking station.
Instructions for securing the unit to the docking station.
Details the process of recharging the internal battery.
Information on the battery's lifespan and replacement.
Overview of the primary menu structure and its options.
Displays current instrument settings and status information.
Allows entry of sample descriptions for saved spectra.
Provides detailed information about identified peaks.
Configuration options for the Multi-Channel Analyzer.
Settings related to the high voltage bias supply.
Controls for the amplifier gain and baseline restorer.
Adjustments for the baseline restorer function.
Displays current amplifier settings.
Configuration of acquisition presets like Live Time and ROI.
Sets acquisition stop based on peak uncertainty.
Configuration for Minimum Detectable Activity presets.
Configuration for Analog-to-Digital Converter settings.
Settings for gain and zero stabilization.
Defines Regions of Interest for nuclide reporting.
Adjusts speaker and headphone volume.
Displays diagnostic status of the instrument.
Controls user access, display security, and calibration.
Sets user and administrator passwords for security.
Allows switching between user and administrator modes.
Secures the display and locks certain commands.
Information on USB port usage for data transfer.
Steps for performing energy calibration of the detector.
Configures display of status and marker line readouts.
Manages stored spectra, file formats, and locations.
Option to prompt for sample description during saving.
Procedure for permanently removing spectrum files.
Toggles the mechanical cooler on or off.
Solution for errors when saving spectrum files.
Steps to resolve the trans-SPEC program freezing.
Guidance on what to do if the instrument is dropped.
Troubleshooting steps for power-on issues.
Addresses unexpected shutdowns of the docking station.
Solutions for display issues or disabled messages.
Resolves issues with switching back to standalone mode.
Handling of battery overheating warnings.
Procedure if the administrator password is lost.
Troubleshooting connection issues with Windows PCs.
Specific troubleshooting for MAESTRO software integration.
Steps for file transfer using Windows Mobile Device Center.
Steps for file transfer using Microsoft ActiveSync.
Steps to take after completing file transfer.
Details the format and calculation of the nuclide report.
Formula and process for calculating MDA presets.
Specifications for the P-type and N-type HPGe detectors.
Specifications for the internal GPS module.
Specifications for the built-in wireless hardware.
Details on spectrum storage capacity and media.
Specifications for the Stirling cooler.
Technical details of the Multi-Channel Analyzer.
Dimensions, weight, and operating environment specs.
Specifications for the docking station.
Specifications for the PAC-II charger.
Requirements for computers used with trans-SPEC.
Procedures and precautions for shipping the instrument.
Guidelines for extended storage and maintenance.
Explains feature bits used in commands.
Steps to enter MCA Mode by connecting to a PC.
Performing quantitative analysis on acquired spectra.
Hardware setup dialogs within MAESTRO software.
Controls for Gain and Baseline Restore in MAESTRO.
Settings for the Low Frequency Rejector (LFR) filter.
Configuration for Conversion Gain and discriminators.
Settings for gain and zero stabilization.
Control for the high voltage bias.
Information related to field data storage.
Displays hardware and firmware information.
Real-time monitoring of instrument parameters.
Configuration of acquisition presets like Live Time and ROI.
Setup for Minimum Detectable Activity presets.
Displays nuclide identification and activity.
Structure and syntax rules for firmware commands.
Explains macro and micro error codes returned by the instrument.
Format of dollar response records for MCB API.
Lists and describes individual MCB commands.
To Next Page