Need help?Do you have a question about the ORVIBO S20 and is the answer not in the manual?
General| Brand | ORVIBO |
|---|---|
| Model | S20 |
| Category | Accessories |
| Language | English |
Lists key features like WiFi network support, smart configure technology, and home appliance status feedback.
Connect socket to power and press switch until it fast blinks red (5 times/s) to reset.
Connect socket to power and press switch until it fast blinks blue (5 times/s) for AP configuration.
Standard operation to turn the socket power on or off.
Indicates Smart link configuration mode for the device.
Indicates Internet connection failure and the socket is powered off.
Indicates successful internet connection and the socket is powered on.
Indicates AP configuration mode for the device.
Indicates Internet connection failure while the socket is powered on.
Indicates successful internet connection and the socket is powered on.
Do not use the device in bathrooms or wet environments to prevent damage.
Be cautious with appliances that have high startup power exceeding 2000W.
Instructions on how to download the companion mobile application for the smart socket.
Describes the initial state of the socket during smart link configuration.
Navigate to the app's configuration screen for setup.
Input the WiFi password to connect the socket and set it up.
Instructions for creating scenes by naming, selecting icons, and setting socket statuses.
Explains how to confirm successful configuration via the backlight indicator.
Provides reasons and solutions for configuration failures.
Explains common causes for slow blinking backlight after configuration.
Differentiates between initial setup (configure) and finding existing devices (search).
Defines the AP configure mode as an auxiliary connection method.
Advises reconfiguring the socket and router when changing network.
Confirms remote control is possible anywhere with network access.
Suggests checking WiFi connection and restarting the router for offline issues.
Details appliance compatibility based on current (10A) and power (2000W) ratings.
Confirms the app provides accurate bidirectional feedback on socket status.
States that an application can support up to 50 smart sockets simultaneously.
Suggests naming or assigning signs in the app for easy identification.
Explains that locking a socket prevents search results for it.
Describes that modifying the remote password prevents others from controlling the socket.
States that each smart socket supports a maximum of 20 timing tasks.
Explains timing task failure due to network time sync or socket power loss.
Explains how to set the power of the smart socket after a specified time.
Clarifies activation triggers for countdown tasks: once created vs. once socket is on.
Provides a solution for configuration failure: disconnect and retry.
To Next Page
