- 14 -
EN
USING THE SAFETY BELT
ACTIVATING AND RELEASING THE BRAKE
• To close the safety belt, secure belts 1 and 2 in belt buckle 3 (Fig. 1).
• To release the safety belt, press the button in the middle of the buckle and pull the belts apart (Fig. 2)
• You can adjust the belt length using the buckles. Push these up or down to adjust the belt length.
• To release the brake, move the pedal on the rear axle upwards (Fig. 3).
• To activate the brake on the buggy, press the pedal downwards (Fig. 4).
To Next Page
Loading...
