EasyManuals Logo

osann Eno360 SL User Manual

osann Eno360 SL
Go to English
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
- 20 -
EN
WARNING
Please read through these instructions carefully before use in order to guarantee the safety of
your child. Retain the instructions. Non-compliance with the instructions in this manual may
result in serious injuries to your child.
The child seat can only be used with its own 5-point belt system for children who weigh under
18 kg and are less than 105 cm in height.
The child seat CANNOT be used with its own 5-point belt system for children who weigh over
18 kg or are taller than 105 cm.
The child seat can be installed rear-facing and forward-facing with the Isofi x connectors and
the stand. When used with a support leg, the maximum height is 105 cm, and the maximum
weight is 18 kg. Important: Do not install the child car seat in a forward-facing position until the
child is at least 15 months old.
For Isofi x installation: Be sure to read the car manufacturer’s manual.
Do not use load-bearing contact points other than those described in the instructions and
indicated in the child restraint system.
Do not use this child car seat at home. It has been designed exclusively for use in a car.
Do not leave your child unsupervised in the seat at any time.
Do not place the rear-facing child car seat on the front seat with an activated airbag. This
could lead to serious injuries or death.
The child seat must be replaced if it is exposed to heavy impact in an accident.
For safety reasons, the child car seat must be secured in the vehicle even when there is no
child sitting in the child car seat.
Always make sure that all straps that attach the child car seat to the vehicle are secure and
that all belts that restrain the child are adjusted to t the child’s body. Ensure that the belts
are not twisted.
Items of luggage and other objects that could cause injury in the event of a collision must be
properly secured.
The rigid elements and plastic parts of a child restraint system must be positioned and in-
stalled so that they cannot become jammed by a movable seat or a vehicle door.
It is important that belts that sit low hold the child’s pelvis rmly in place. Your child should
always be fastened in to stop them from falling out.
It is dangerous to make changes or additions to the product without approval from the re-
sponsible authority. Non-compliance with the installation instructions provided by the manu-
facturer of the child restraint system may also present risks to the safety of your child.
This child seat is designed for children with a maximum height of 150 cm. Never overload the
child seat by transporting more than one child or additional loads in it.
The child restraint system must not be used without the seat cover.
The seat cover must not be replaced by a cover other than that recommended by the manu-
facturer, as this seat cover is an important component of the restraint system.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the osann Eno360 SL and is the answer not in the manual?

osann Eno360 SL Specifications

General IconGeneral
StandardECE R44/04
Group0+/1/2/3
Child Weight0-36 kg
Rotation360°
Side Impact ProtectionYes
Recline PositionsMultiple
Headrest AdjustmentYes
Harness AdjustmentYes
Removable CoverYes
TypeConvertible
InstallationISOFIX
DirectionRearward and Forward Facing
Installation DirectionRearward and Forward Facing
Weight GroupGroup 0+/1

Related product manuals