EasyManuals Logo

osann Lupo User Manual

osann Lupo
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
- 20 -
EN
2) Size class 100-150 cm, forward-facing
1 . The 5-point belt of the child car seat must be stowed as previously described. This is not
needed in this size class.
2 . Push the child car seat in until it rests securely against the backrest of the vehicle seat.
3 . Thread the diagonal belt of the 3-point seat belt in the car through the diagonal belt guide on
the headrest of the child car seat.
4 . Put your child in the child car seat.
5 . Adjust the height of the headrest so that the child’s head is fully in the headrest and the diagonal
belt comes out through the belt guide at the level of the child’s shoulders.
6 . Fasten the belt buckle of the 3-point seat belt until you hear a click.
7 . Make sure that both the diagonal belt and the lap belt run along the second lap belt guide
(below the armrest) on the child car seat, which faces the car's seat belt buckle.
8 . Pull on the diagonal strap to tighten it. Make sure that the straps are not twisted.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the osann Lupo and is the answer not in the manual?

osann Lupo Specifications

General IconGeneral
Adjustable HeadrestYes
Harness Type5-point harness
Side Impact ProtectionYes
Removable CoverYes
CertificationECE R44/04

Related product manuals