- 24 -
EN
Adjusting the head support
• Release the belt and pull the lever to adjust
the headrest on the back of the child car seat.
Move the headrest until it engages at the cor-
rect height.
• Make sure the shoulder straps are positioned
just above your child’s shoulders when they
come out of the child car seat.
• Release the lever and ensure that the head
support is engaged.
Isofi x connectors
• Press the two lateral Isofi x connector buttons
in order to extend the length of the Isofi x con-
nectors.
• Guide the Isofi x connectors onto the Isofi x
anchor points on the seat of the vehicle and
ensure that they lock into position.
• Push the child car seat in until it rests securely
against the backrest of the seat of the vehicle.
Ensure that both Isofi x indicators are showing
green.
Head cushion & comfort insert
• The head cushion and comfort insert are de-
signed for babies with a body height of 40-75
cm.
• Please remove both inserts as soon as your
child has exceeded the specifi ed body size.
To Next Page
Loading...
