Mounting the fixed part of bracket
Before climbing on the mast / signal mast, prepare the following material to
take along:
o fixed part of bracket (6)
o 2x Flange Screw M5x40 (7)
o 2x Flange Nut M5 (8)
o Vision Unit (1) now fixed to the Bracket – Part 1 (3)
o Torque wrench including socket wrench Size 8
o 4x Screws M6 for adjustable fixing bracket + torque wrench
o Marker/Pencil
o Driller M6
ATTENTION: Use proper screws and screw locking to mount the bracket on the
mast! Do not use wood-screws (spax-screws).
To Next Page
Loading...