page 1
3121573
The purpose of this instruction is to properly install and
route the manual descent valve cable on JLG ES scissors
models when the cartridge valve PN: 7023543 is
replaced.
It is recommended that you read and thoroughly
understand these instructions before starting this
procedure.
Models Affected:
• 1930ES: equipped with lift cylinder PN 1684484
• 2030ES: equipped with lift cylinder PN 1684487
• 2630ES: equipped with lift cylinder PN 1684488
• 2646ES: equipped with lift cylinder PN 1684489
• 3246ES: equipped with lift cylinder PN 1684490
Options/Accessories Prohibited When Installing This
Kit:
• None
Tools & Equipment Required:
• Standard mechanic’s tools
Personnel Required:
• Qualified JLG equipment mechanic
General Guidelines:
This procedure provides parts and information for a
specific update. It is the responsibility of the entity
performing the updates to determine if they can be
completed by this procedure.
Refer to the service and maintenance manual and
illustrated parts manual for safe and proper
disassembly/assembly procedures.
NOTICE
Use all applicable Safety precautions while
working on, around or under any machinery
.
CAUTION
Disconnect the battery power from the machine.
ES Scissors Descent Valve Cable Replacement
Installation Instructions
A
05/30/2015
3121573
To Next Page
General