The Osmo TopCutter is a versatile 5-in-1 grooming device designed for shaving, trimming, and facial cleansing. It features a main shaver unit with multiple interchangeable heads to cater to various grooming needs.

Function Description:

The core function of the Osmo TopCutter is shaving, performed by the main shaver head with three super-thin alloy blades. Beyond shaving, it offers precision trimming for hair, nose, and ears, as well as facial cleansing and soft face sponging.

Components:

The product comes with the following components:

(a) Shaver: The main unit housing the motor and battery, to which all other heads attach.
(b) Charger: Used to power the device. It transforms 220V to a safe low voltage of 2.4V.
(c) Comb: Used with the precision trimmer for different hair lengths.
(d) Precision-trimmer: An attachment for hair clipping and detailing.
(e) Nose hair trimmer cover: A protective cover for the nose hair trimmer.
(f) Nose & ear trimmer: An attachment specifically designed for trimming nose and ear hair.
(g) Soft face sponge: An attachment for gentle facial cleansing.
(h) Facial cleaning brush: An attachment for deeper facial cleansing.

Important Technical Specifications:

Waterproof Grade: IPX7, indicating it can be rinsed under running water.
Charging Voltage: The charger transforms 220V to 2.4V.
Charging Time: Fast charge for 1 hour.
Usage Time: Approximately 60 minutes after a full charge.
Operating/Storage Temperature: Should not exceed 5°C – 35°C.
Blades: Three super-thin alloy blades for the main shaver head.

Usage Features:

General Use:

Ensure the product is powered off before charging.
The device should not be connected to the power supply for more than 24 hours.
The charger should not be rinsed under water.
Unplug the charger before cleaning the shaver with running water.
When charging, the indicator light is red; it shows "60" when fully charged.
Always use the protective cover on the shaver head when traveling to prevent damage.
This product is not intended for use by individuals with physical, sensory, or mental disorders, or inexperienced persons (including children), unless under supervision or instruction from a responsible adult.
Keep children away from the product.

Shaving:

Press the ON/OFF button to start the shaver.
Move the shaver head quickly on the skin in straight lines and circles for an effective shave.
For optimal shaving, clean the shaver regularly.

Charging:

Insert the product charger into the shaver.
Plug in the charger.
The charger indicator lights up.
After a full charge, unplug the charger and remove the product's plug from the shaver.
The device can also be charged using a charging base.

Replacing Shaver Head Assembly:

Pull out the old shaver head assembly.
Insert the new shaver head assembly into the groove on the shaver's top and press down until a "click" is heard, indicating it's mounted securely.

Precision Trimmer (Hair Clipper) Instructions:

Turn off the shaver power and remove the shaver head.
Insert the hair clipper into the slot of the top shaver.
Press down the hair clipper head part until a "kaca" sound is heard, indicating it's installed.
Ensure hair is clean and dry; do not use for wet hair.
Comb hair according to growth direction before clipping.
Attach comb accessories to the slots on both sides until a sound is heard, ensuring they are fixed.
Comb accessories offer "3MM" and "6MM" lengths; replace them according to the length mark.
Open the switch and move the trimmer slowly over the hair. For best results, use it in a direction different from hair growth.

Nose Trimmer Instruction:

Turn off the shaver power, remove the shaver head, and insert the nose trimmer into the slot of the top shaver.
Press down the nose trimmer head until a "kaca" sound is heard.
Trim Nose Hair: Ensure the nose is clean. Open the switch, put the nose trimmer towards the inside of your nose, and turn it to clip long nose hair. Do not exceed 0.5cm for trimmer length inside your nose. Place one side of the trimmer tip close to your skin to reduce itching.
Clip Ear Hair: Clean the outside ear, ensuring no earwax. Open the switch, turn the trimmer tip towards your ear to clip long hair. Put the trimmer tip towards your outside ear lap slowly. Do not exceed 0.5cm for trimmer tip length inside your ear.

Soft Face Sponge & Facial Cleaning Brush:

Used for trimming temples and moustaches (by pushing the slides upwards to open the hair trimmer).
Use the rotating brush attachment with daily cleansing cream to remove oil and dirt.
Ensure the appliance is switched off before attaching the cleansing brush.
Moisten the attachment with water; do not use a dry brush head to avoid skin irritation.
The soft face sponge and facial cleansing brush share the same base.
For Shaving Preparation: Use the attachment before shaving for easier and more hygienic results.
1. Moisten your face and apply a cleanser.
2. Place the attachment on your right cheek.
3. Switch on the appliance.
4. Gently move the attachment across your skin from the nose towards the ear. Do not press too hard.
5. After approximately 20 seconds, move to the left cheek.
6. Avoid cleaning sensitive areas around the eyes.
7. After approximately 20 seconds, move to the forehead and cleanse from left to right.
Do not overdo cleansing; do not cleanse any area longer than 20 seconds.
After treatment, rinse and dry your face.

Maintenance Features:

Cleaning the Shaver Head:

Stop the shaver.
Pull away the shaver heads on the side, one by one, then rotate and pull out the middle head in the indicated arrow direction.
Clean the shaver head part and the hair storeroom with running water, ensuring both the shaver and hair storeroom are thoroughly cleaned.
Wash the product's surface.
Close the shaver head part and shake off surplus water.
Do not wipe the shaver head part with a towel or paper tissue, as this may cause damage.
Open the shaver head part again and leave it open to dry.
Use the included brush to clean the hair storeroom.

Cleanness / Lubricate:

Remove the precision trimmer head and use a brush to clean the trimmer or clipper, or wash the trimmer head.
Do not use abrasive alcohol, gasoline, or acetone to wash the product.
Clean the product immediately after each use.
For best performance, add lubricating oil every three months. Lubricating oil is not included and must be purchased separately.

Shaver Head Replacement:

Change the shaver head once a year for the best shaving effect.
The shaver has a long service life if not damaged by human factors.
Damaged shaver heads can only be replaced with shaver heads from the same company.

Environmental Protection:

Do not dispose of the product with general domestic waste. Hand it to an official recycle center for environmental protection.
The built-in rechargeable battery contains substances that may pollute the environment. It must be unloaded from the product or sent to an officially designated recycle center for disposal before the product is discarded.
The battery should not be unloaded unless it has been used up.
To unload the battery: Unplug the charger and pull out the product plug from the shaver, then unload the battery. Do not plug in the shaver again after unloading the battery.

Osmo TopCutter - Information; Product brief introduction