OSP Designs MET41 - Assembly Instructions; Step 1: Attach Seat Assembly to Back Panel; Step 2: Secure Support Back and Seat Assembly

7 pages

To Next Page

To Previous Page

STEP 1

Attach Seat Assembly (1) to Back Panel (6) using three Short Bolts (I). FULLY TIGHTEN SHORT BOLTS (I).

STEP 2

Attach Support Back (8) to Seat Assembly (1) using one Medium Bolt (H), FULLY TIGHTEN MEDIUM BOLT (H). Further secure Seat

Assembly (1) to Back Panel (6) using four Wood Screws (J). FULLY TIGHTEN ALL WOOD SCREWS (J).