AETHER AG
TM
/ ARIEL AG
TM
SERIES
7
SIZING / FIT
INTERCHANGEABLE HIPBELT & HARNESS
Features interchangeable hipbelts to accommodate differences in body proportions and ensure
perfect fit.
To remove the hipbelt:
1 Unclip the buckle behind the zippered hipbelt pocket. Repeat on the opposite side.
2 Remove the rigid hipbelt wing from the hipbelt. Repeat on the opposite side
3 Remove the hipbelt from behind the AntiGravity™ mesh lumbar panel
4 Reverse instructions to reinstall new hipbelt.
To remove the harness:
1 Unthread load lifter webbing on both sides of harness
2 Unthread lower harness strap webbing on both sides of harness
3 Slide hand between backpanel and harness to release hook and
loop attachment
4 Reverse steps to install new harness
To adjust the harness:
A Slide hand between backpanel and harness to release hook and loop
attachment and slide harness into position using arrows to guide
1
2
2
3