Osprey AETHER PLUS Series User Manual

AETHER | ARIEL PLUS
10
FEATURES
RAINCOVER
1 Locate raincover icon on the toplid.
2 Remove raincover from compartment and slip it over the top and bottom
of the pack.
3 Tighten the cord lock at the bottom of raincover to tension raincover into
place.
4 To detach raincover, unfasten toggle from cord loop.
Tip: To prevent mildew, allow raincover to dry entirely before storing.
DUAL ICE TOOL ATTACHMENT
The ice tool loops and bungee tieos provide secure tool attachment.
A Slide the tool shaft through the top of the ice tool loop and ip the shaft up toward
the top of the pack.
B Loosen the bungee cord lock and route the tool handle through the bungee.
Tighten the cord lock nesting it into the Y-clip to secure the tool into place.
C Reverse to remove.
SLEEPING PAD STRAPS
Removable sleeping pad straps for external attachment.
A Unclip the two sleeping pad strap buckles.
B Remove the webbing from the triglide
at the base of the pack.
C Reverse to reattach.
INTERNAL RESERVOIR SLEEVE
Place reservoir inside sleeve to help ensure proper pack weight distribution.
Clip reservoir to buckled loop to keep upright.

Osprey AETHER PLUS Series Specifications

General

Frame	LightWire peripheral frame
Adjustable Harness	Yes
Removable Top Lid	Yes
Category	Backpacking
Intended Use	Backpacking
Features	Stow-on-the-Go trekking pole attachment, side stretch mesh pockets
Material	Main: bluesign® approved 420D high tenacity nylon, PFC-free DWR; Accent: bluesign® approved 210D high tenacity nylon, PFC-free DWR; Bottom: bluesign® approved 420D high tenacity nylon, PFC-free DWR