AETHER / ARIEL PRO SERIES
8
FEATURE DETAILS
DUAL FRONT COMPRESSION STRAPS
70L / 65L
Dual front panel compression straps help stabilize loads. Loosen the front
compression straps while packing, and pull the straps afterward to tighten.
REMOVABLE SLEEPING PAD STRAPS
70L / 65L
Removable sleeping pad straps for external attachment.
A Unthread the webbing from the triglide.
B Unthread the webbing from the girth hitch attachment.
C Reverse to reattach.
STERNUM STRAP WITH INTEGRATED SAFETY WHISTLE
70L / 65L
REMOVABLE DUAL ICE TOOL LOOPS WITH UPPER CORD ATTACHMENTS
70L / 65L
Dual removable ice tool loops provide lightweight tool attachment.
To remove the lower tool loops:
A Untie the knot at the end of the cord loop
B Remove the cord from the two small web loops
To attach tools:
A Slide the tool shaft through the top of the ice tool loop and flip the shaft up
toward the top of the pack.
B Place the shaft between the upper cord loop and front compression flap, then
thread the front compression strap buckle through the upper cord loop, clip the
buckle, then tighten.
C Reverse to remove.
REINFORCED CORD LOOPS TO ATTACH OSPREY DAYLITE DAYPACK OR ALPINE POCKET
70L / 65L
Daylite/Alpine Pocket Attachment
The triglide sliders on the Daylite/Daylite+ and the metal hooks on the Alpine pocket
attach to the four cord loops located on the front panel of the Aether/Ariel Pro
A To attach the Daylite/Daylite+, push the slider through the cord loop from
underneath and pull the side compression straps to tighten/adjust tension
as needed.
B To attach the Alpine Pocket, attach the four metal hooks to the web loops.
To Next Page
Loading...
Need help?
General
