5
NOTE: Push Button (8) may be shortened by unscrewing from lock body and cutting it
with hacksaw.
Attachment Pin: Apply Loctite 410 or 411 onto threads (F) on Attachment Pin (11) and
screw it into Locking Liner. Torque Attachment Pin to 4Nm (3ft.lb).
Also available:
L-292003 Attachment Pin clutch, short (7 notches).
L-292005 Attachment Pin clutch, long (17 notches).
NOTE: Use attachment pins for Icelock 200 series only.
T-wrench (10) supplied is specially designed to wind Push Button (8) on Clutch
Mechanism (7) when donning socket. Use of any other tool may result in over
tightening.
• Limited one-year warranty.
• Rated up to high activity level (K3).
To Next Page
Loading...
Need help?
General
