Oster ACTIFIT BLSTAFB - Getting Started with Your Smoothie Maker; How to Use Your Smoothie Maker

GETTING TO KNOW YOUR
OSTER® ACTIFIT SMOOTHIE MAKER
Your appliance includes the following technology and features:
• 20 oz. portable Tritan™ cup – Tritan™ technology provides the
benets of a glass cup in a resistant, odorless, and non-toxic plastic
• Ice-crushing blade
• All-Metal Drive
®
10x stronger*
• Spill-proof spout with lid and handle for better portability
Before you use the appliance for the rst time, separate lid, cup, locking
sealing ring, blade and threaded cup bottom. Wash in warm, soapy
water, or top rack in the dishwasher. Rinse and dry well.
USING YOUR SMOOTHIE MAKER
1. Plug in unit into appropriate outlet.
2. Turn cup leaving opening side up and place all ingredients inside it
(Figure 1).
3. Place the blade into the threaded cup bottom (Figure 2).
4. Place the locking sealing ring over the blade (Figure 3). Carefully
press and tuck the sealing ring into the last groove of the threaded
cup bottom.
5. Ensure the locking sealing ring is fully and evenly tucked in place and
holding the blade to the threaded cup bottom.
6. Install the threaded cup bottom with blade and sealing ring onto the
cup (Figure 4). Turn to the right to tighten.
7. Be sure the threaded cup bottom with blade and sealing ring is
tightened to the cup before use.
8. Place the cup onto the motor base (Figure 5).
9. To utilize your nutrition system, you may use the standard speed
option or the pulse function.
a. To use the standard speed, ensure to push the cup down and turn
clockwise with your hand until it is well inserted onto 4 grooves in
base as indicated (Figure 6). If it is not possible to place the cup
rmly inside the base, ensure the appliance is unplugged and
rotate the metal pin slightly (Figure 7), plug the unit back into the
outlet and replace the cup making sure that it completely enters
the base. Once you have achieved desired result, push the cup
down, turn counterclockwise and remove from the base (Figure 8).
b. To use the pulse function, push the cup down for a brief desired
length of time.
DO NOT PROCESS HOT FOODS OR LIQUIDS.
*Ultimate tensile strength of 1215 C.R.S. when compared to PP plastic
Figure 5
Figure 4
Figure 6
Figure 7
Figure 1
Figure 2
Figure 3
BLSTAFB_21EM1 (US).indd 4BLSTAFB_21EM1 (US).indd 4 11/9/2021 10:41:31 AM11/9/2021 10:41:31 AM