English-4
LEARNING ABOUT YOUR APPLIANCE
ASSEMBLING YOUR BLENDER
1. Turn jar upside down so the small opening is at the top. Place sealing ring over
jar opening.
2. Place blade into jar.
3. Snap threaded bottom disc and collar together. Place collar over blade and jar.
(Note: If there are slots on top of collar, line them up with notches on jar.) Place
the collar on jar and turn the threaded bottom disc clockwise to tighten.
4. Place jar assembly onto base.
SELECTING THE SPEED
Slide switch to s High or t Low (if your model does not have a slide switch, push the
s High or t Low button.)
Push desired speed and blend ingredients to desired consistency.
Push off button “O” to stop the blender and turn blender off.
To use pulse “ ”, select s High or t Low. Push “ ” and hold down for desired length
of time. Release “ ” and allow blade to stop. Repeat cycle as desired.
TIP: Refer to the “Guide For Processing Foods in Blender”.
1.
2.
3.
4.
To Next Page
Loading...
