6
MANUAL CONTROLS
Models with rotary dial control
1. Turn dial to desired speed and blend ingredients to desired consistency.
2. Turn dial to the off “O” position to stop the blender and turn blender off.
3. To use the PULSE function:
• To use PULSE if dial is on the off to the left of the dial position, turn dial
to speed 1 for a brief desired length of time and turn it right back to the
off “O” position.
• To use PULSE if dial is on the off position on the right of the dial turn
dial to speed 3 for a brief desired length of time and turn it left back to
the off “O” position.
4. Repeat cycle as desired.
BLENDING TIPS
• Putliquidsinthejarrst,unlessarecipesaysotherwise.
• Crushing Ice: Crush 6 ice cubes or approximately 2 cups of ice at a time.
• Donotremovethelidwhileinuse.Removellercaptoaddsmalleringredients.
• HotFoods:Openthellercaptoventsteam.Tiltllercapawayfromyou.Keephands
away from the cover opening to prevent possible burns. When working with hot liquids,
removellercapandstartblendingatalowspeedthenmovetoafasterspeed.Donot
add liquid over the 4 cup (1 Liter) level.
• Cutallrmfruitsandvegetables,cookedmeats,shandseafoodintopiecesnolarger
than 3/4 inch (1.8 cm) to 1 inch (2.5 cm). Cut all kinds of cheeses into pieces no larger
than 3/4 inch (1.8 cm).
• REVERSE/ PULSE function should be used to help disloge and mix foods. No cutting
or chopping occurs while using this function.
The maximum rating as marked on the unit is based on the attachment that draws
the greatest load. Other recommended attachments may draw significantly less
power.
BLSTSE75_20SEPM1 (LA).indd 6BLSTSE75_20SEPM1 (LA).indd 6 11/6/20 10:1611/6/20 10:16