Oster FPSTFPMP-TS User Manual

www.oster.com
www.oster.com
6
7
4 OFF Setting: Press the OFF button in between jobs to stop the food processor.
When not in use, the appliance should always be unplugged.
NOTE: Touchscreen display is sensitive to inadvertent food and body contact.
How to Assemble the Bowl
WARNING: Be sure the unit is unplugged before
putting on or taking o any parts.
Put the bowl on top of the food processor base,
with the work bowl handle to the right. Turn the
bowl clockwise until the bowl clicks into place.
The handle should now be to the right of the
control panel. (Figure 2)
Select the appropriate attachment and assemble
onto food processor as directed in the chopping,
kneading or slicing/shredding sections. Place
food or dough in bowl if using multipurpose
blade or dough blade.
NOTE: There is only one position for the bowl to
lock onto the base. The unit will not operate if the
bowl does not lock onto the base.
How to Lock the Cover
To assemble the lid, align the line on the lid to the unlock
symbol on the work bowl. Turn the lid clockwise until the
line aligns with the lock symbol. (Figure 3)
Figure 2
Figure 3
How to Chop
CAUTION: Make sure the unit is turned OFF and unplugged before use. Never
use hand to push food into processor. Do not use the processor continuously
for more than 3 minutes at a time.
Multipurpose Blade: Use multipurpose blade for
chopping, mixing, blending, pureeing and preparing pu
pastry, crumbs and short crust pastry.
1 Lock the bowl onto base.
(See “How to Assemble the Bowl”)
2 Take the disc stem and slide it onto the center post.
Then grasp the multipurpose blade by its stem and
slide over the disc stem. (Figure 4)
CAUTION: Chopping Blade is very sharp, use caution
when handling.
3 Place food into bowl.
4 Lock cover onto bowl. (See “How to Lock the Cover”)
5 Place the food pusher into the feed tube.
6 Plug the cord into an electric outlet.
Use the Food Guide to prepare food for
chopping.
7 Press the ON/OFF button.
8 Press the High, Low, and Pulse. When
using the Pulse setting, hold down the
Pulse button for about 2–3 seconds
at a time, check results and repeat if
desired.
9 When nished processing, press the LOW or HIGH button again and allow
the chopping blade to stop rotating.
10 Twist the cover counter-clockwise to remove lid.
11 Hold the disc stem with multi purpose blade attached by its stem and
remove. Unlock the bowl by turning it counter- clockwise towards the
UNLOCK mark, and lift o. Empty the processed food.
Figure 4

Oster FPSTFPMP-TS Specifications

General

Brand	Oster
Model	FPSTFPMP-TS
Category	Food Processor
Language	English