1. Place the MyBlend
®
Plus
®
Sport
Bottle on a flat surface with
the open end facing up. Fill the
Sport Bottle with your favorite
ingredients. Be sure not to fill
ingredients past the 600 mL.
marking.
2. Fasten the Blade Assembly on the
open end of the Sport Bottle. In
order to avoid accidental spills,
make sure the Blade Assembly is
tightly threaded onto the Sport
Bottle before placing on the
Blender Base.
3. Once the Blade Assembly is
secured tightly, turn the Sport
Bottle over and attach to the
Blender Base, aligning the graphic
arrows. Twist to lock the Sport
Bottle in place. See figures 2 & 3.
4. Press and hold the One-Touch
Blend Button and release when
ingredients are blended to desired
consistency.
5. Once blending is complete,
remove the Sport Bottle from
the appliance Blender Base by
turning in a counter-clockwise
direction. Turn the Sport Bottle
over and unscrew the Blade
Assembly. Attach the Spill-Proof
Drinking Lid. See figure 4.
Using Your Oster
®
MyBlend
®
Plus Personal Blender
Clean blender according to the instructions in the “Recommended Cleaning
and Storing Instructions” section.
Welcome
Congratulations on your purchase of an OSTER
®
MyBlend
®
Plus Personal
Blender! To learn more about OSTER
®
products, please visit us
at www.oster.com.
Spill-Proof Drinking Lid
20 oz. (600 mL) Sport Bottle
Blade Assembly
One-Touch Blend Button
Blender Base
Power Cord
Features of Oster
®
MyBlend
®
Plus Personal Blender
4 | www.oster.com www.oster.com | 5
Figure 1 Figure 2 Figure 3 Figure 4
BLSTPB-MBP-000-033_20EFM2 (Canada).indd 4-5BLSTPB-MBP-000-033_20EFM2 (Canada).indd 4-5 10/28/20 10:5910/28/20 10:59