EasyManua.ls Logo

Oster PRIMALATTE II TOUCH - Cleaning Water Reservoir and Descaling

Oster PRIMALATTE II TOUCH
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English-16
1. To remove the detachable bottom covers from under the lters, rotate them counterclockwise
towards the unlock icon “ ”.
2. Wash the detachable bottom covers and lters with warm soapy water. Make sure to rinse and
dry them well.
3. Place the detachable bottom covers back onto the lters by inserting them in their place and then
rotating them clockwise (away from the unlock icon “ ”) until you hear it click.
FROTH MILK DISPENSING TUBE CLEANING - WITHOUT AFFECTING MILK IN RESERVOIR
1. Ensure the milk reservoir and lid are properly inserted in the unit.
2. Place a large empty mug under the froth dispensing tube.
3. Turn the Froth Control Knob counter clockwise to the clean position
” then press the “ ” button to activate the clean function. The unit will start releasing steam
through the froth dispensing tube. Let the cleaning cycle run until you no longer see any water
coming out of the tube, or let the cycle run until it stops automatically.
4. Dispose of the water in the mug.
5. You can remove the milk reservoir with the lid and store it in the fridge for later use.
CLEANING THE BREW HEAD, THE PORTA-FILTER AND FILTERS
1. Press the on/off “I/O” switch located on the right side of the unit to the off position “O” and unplug
the power cord from the electrical outlet.
2. Some of the metal parts may still be hot. Do not touch them with your hands until they have
cooled.
3. Remove the porta-lter and discard the coffee grounds or used pod. Wash both the porta-lter
and lter thoroughly with warm soapy water. Make sure to rinse and dry them well.
NOTE: Do not wash the porta-lters and lters in the dishwasher.
4. Wipe the lower part of the brew head in the unit with a damp cloth or paper towel to remove any
coffee grounds that might have been left.
5. Place the porta-lter (without any lter) back in the brew head in the unit and lock it in place.
6. Place a large empty cup under the porta-lter.
7. Plug the power cord into the electrical outlet. Press the on/off “I/O” switch to the on position “I”.
Press the Espresso “ ” button once and let the unit brew with water until it stops automatically.
Unlock
Step1
Step2 Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
Unlock
Step1
Step2
Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
Unlock
Step1 Step2
Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
BVSTEM6801_22SEPM1 (LA).indd 16BVSTEM6801_22SEPM1 (LA).indd 16 2022/6/6 9:53 AM2022/6/6 9:53 AM

Related product manuals