Need help?Do you have a question about the Otodynamics Otoport Advance and is the answer not in the manual?
General| ABR | Yes |
|---|---|
| CE-Chirp | Yes |
| Automated ABR | Yes |
| Connectivity | USB |
| Stimulus | Click, Toneburst |
| Data Transfer | USB |
| Battery Life | Up to 8 hours |
| Humidity | Up to 90% RH, non-condensing |
Identifies and explains the various controls, indicators, and connection ports on the Otoport device.
Details specific controls, indicators, and connections for the Otoport OAE+ABR model.
Provides step-by-step instructions for attaching the ABR Module to the Otoport unit.
Explains how to correctly connect the probes and electrodes to the Otoport module for testing.
Outlines essential pre-test checks for the Otoport and the testing environment for optimal results.
Guides on selecting the correct probe tip and fitting it properly for accurate OAE recordings.
Addresses common issues encountered during OAE testing and provides troubleshooting steps.
Covers potential problems during ABR testing and offers solutions for resolving them.
Describes the Checkfit screen and its role in assessing test conditions before a TEOAE test.
Explains the DPOAE Checkfit process, ensuring correct test environment and probe fit.
Explains the importance and process of checking electrode impedance for ABR testing.
Describes the ABR Checkfit procedure to ensure optimal conditions before starting the test.
Provides access to configure various test parameters and modes for OAE/ABR testing.
Details how to configure specific test parameters like stimulus level, noise reject, and response window.
Explains how to set and adjust criteria that automatically control test termination.
Describes how to configure automated test sequences for TEOAE, DPOAE, and ABR tests.
Explains how to perform calibration checks on the Otoport probes using a test cavity.
To Next Page