Ottai M8 - Page 39

39
ɣɢ˚~ňīġŅŔŌ¼ģßňīřØěãŌāīīŔąģù
Prompt / Fault
Bluetooth connection
ąģŔãňňřŅŔã߲ňãŌřěŔąģùąģ
failure of glucose data
synchronization.
ěřãŔīīŔāŔřňģãßīƆ˛
resulting in failure of glucose
data synchronization.
Øģīňġ¼ěģãŔŲīňė
ÙīģģãÙŔąīģ˛ģãŲßãűąÙã
cannot be connected
successfully.
DģŔãňģãŔÙīģģãÙŔąīģ
¼Øģīňġ¼ěąŔŸ˛ŌŔ¼ŔąŌŔąÙŌŅ¼ùã
data can not be displayed
normally.
Abnormal glucose data.
Binding failed.
AąùāùěřÙīŌã¼ěãƑ˚
VīŲùěřÙīŌã¼ěãƑ˚
Permission to be activated.
APP crashed or freezes.
ėąģ¼ěěãňùŸ¼øŔãň
device implantation
āãŌġ¼ƑßãűąÙãąŌŔīīø¼ň
away from the Sensor.
ěřãŔīīŔāīƆ˚
^īDģŔãňģãŔÙīģģãÙŔąīģ˚
^īDģŔãňģãŔÙīģģãÙŔąīģ˚
āããģŌīňąŌø¼ěěąģùīƆ˛
the Sensor is severely
ňřØØã߲Ŕāã¼ßāãŌąűãąŌ
ÙīģŔ¼ġąģ¼Ŕã߲ŔāããģŌīňąŌ
not installed correctly.
Bound devices are not
monitors.
Glucose reading is
ãŷÙããßąģùŔāãŅňãŌãŔěąġąŔ˚
Glucose reading is
ãŷÙããßąģùŔāãŅňãŌãŔěąġąŔ˚
ãŇřąňãßŅãňġąŌŌąīģøīň
Ottai has not been activated
on the mobile phone.
ġ¼ƑßãűąÙãŌŸŌŔãġÙň¼Ōā˚
ěīŔāãŌ˛øīěßŌ¼ģßīŔāãň
objects in the installation
Ņ¼ƑňřØŌ¼ù¼ąģŌŔã¼ÙāīŔāãň˚
āãřŌãňąŌ¼ěěãňùąÙŔīŔāã
material of the product.
Continue glucose monitoring
¼ģßŌããėġãßąÙ¼ěŔňã¼ŔġãģŔ
ąøģãÙãŌŌ¼Ɣ˚
Continue glucose monitoring
¼ģßŌããėġãßąÙ¼ěŔňã¼ŔġãģŔ
ąøģãÙãŌŌ¼Ɣ˚
Activate the corresponding
permissions according to
the instructions.
Open the App store and
upgrade the App version.
\¼ėãŌřňãŔāãßãűąÙãąŌ
not rubbing against other
objects.
Contact your doctor.
āããģŌīňā¼ŌØããģřŌãß˚
āīƑãģŔāãßąŌŔ¼ģÙã
between the phone and the
Sensor.
řňģīģěřãŔīīŔā˚
āãÙėŔāãDģŔãňģãŔ
ÙīģģãÙŔąīģīňňãŔƔŔāã
DģŔãňģãŔÙīģģãÙŔąīģ˚
āãÙėŔāãģãŔŲīňė
ÙīģģãÙŔąīģīňňãŔƔŔāã
ģãŔŲīňėÙīģģãÙŔąīģ˚
āãÙėŲāãŔāãňŔāã
appearance of the Sensor is
intact and replace it if there
ąŌ¼ģŸß¼ġ¼ùã˛īň˛ąøŔāãňã
ąŌģīß¼ġ¼ùã˛ÙīģŔąģřã
glucose monitoring and
ŌããėġãßąÙ¼ěŔňã¼ŔġãģŔąø
ģãÙãŌŌ¼Ɣ˚
Select Sensor for Binding.
Bind a new Sensor.
Possible Reason Solution