3) Allow to air dry in order to remove residual moisture.
7 Maintenance
CAUTION
Failure to follow the maintenance instructions
Risk of injuries due to changes in or loss of functionality and dam
age to the product
►
Observe the following maintenance instructions.
►
A visual inspection and functional test of the prosthetic compon
ents should be performed after the first 30days of use.
►
Inspect the entire prosthesis for wear during normal consulta
tions.
►
Conduct annual safety inspections.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.
9 Legal information
All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
19
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on
medical devices. The CE declaration of conformity can be down
loaded from the manufacturer's website.
9.3 Warranty
The manufacturer warrants this device from the date of purchase. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.
10 Technical data
Lamination anchor, three-arm
Reference number 4R41 4R42 4R42=1 4R42=5
System height [mm]
39 -5 -5 -5
Weight [g]
170 130 125 125
Material
Stainless steel
Max. body weight
[kg]
125 150 136 136
Reference number 4R43 4R89
System height [mm]
8 -3
Weight [g]
95 180
Material
Stainless steel
Max. body weight
[kg]
125 125
Lamination anchor, four-arm
Reference number 4R111 4R111=
N
4R111=T 4R116
Weight [g]
155 80 165 165
System height [mm]
44 13 2 13
To Next Page
Loading...
