What to do if the pads are chafing on Otto Bock Paexo Shoulder 16ES100-2?
If the pads are chafing, it's likely because they've folded over in the arm shell or are worn, reducing the padding. Contact the manufacturer to request replacement pads and attach the new pads in the arm shells.
What to do if rubber band has holes or is torn on Otto Bock Safety Equipment?
If the rubber band has holes or is torn, it indicates the rubber band is worn. Contact the manufacturer to request a spare part and install the rubber strap holder on the shoulder strap.
Why is the expander tension disrupted in my Otto Bock Paexo Shoulder 16ES100-2?
Disrupted expander tension, leading to decreased support, can be due to a worn expander. It is recommended to send the product to the manufacturer to have expanders replaced or have qualified personnel with the appropriate expertise remedy the fault.
What to do if the joint unit jams on Otto Bock Safety Equipment?
If the joint unit jams, it may be due to a worn joint unit. Send the product to the manufacturer to have joint unit replaced or have qualified personnel with the appropriate expertise remedy the fault.
General| Product Type | Exoskeleton |
|---|---|
| Category | Safety Equipment |
| Product Name | Paexo Shoulder |
| Intended Use | Support for overhead work |
| Material | Textile, Plastic, Metal |
| Adjustability | Yes |
| Load Support | Supports arm movements |
| Support Force | Adjustable support force |
| Operating Temperature | 0°C to 40°C |
| Certification | CE certified |
To Next Page