Need help?Do you have a question about the Ouellet OCD09KCH23S and is the answer not in the manual?
General| Model | OCD09KCH23S |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 9000 BTU |
| Heating Seasonal Performance Factor (HSPF) | 10.0 |
| Voltage | 230V |
| Power Supply | 1-phase, 60Hz |
| Noise Level (Outdoor) | 50 dB |
Explains hazard symbols (Danger, Warning, Caution, Notice).
Safety guidelines for operating and maintaining the air conditioner.
Details electrical safety and wiring standards for installation.
Specifies safe and optimal locations for unit installation.
Lists the operational temperature limits for cooling and heating.
Identifies parts of the indoor unit and remote control.
Identifies parts of the outdoor unit.
Explains the meaning of indicators and symbols on the indoor unit display.
Lists and explains remote control buttons and screen icons.
Details ON/OFF, +/-, and MODE button operations.
Explains COOL, DRY, FAN, HEAT modes and FAN/SWING button functions.
Explains I FEEL, SLEEP, TEMP display, and Timer functions.
Explains CLOCK, TURBO, LIGHT, and X-FAN button functions.
How to activate child lock and change temperature units (°C/°F).
Explains the freeze protection mode for low temperatures.
Step-by-step instructions for replacing remote control batteries.
How to operate the unit manually using the AUX button.
Instructions for cleaning the indoor unit's exterior.
Detailed steps for cleaning the air filter.
Essential checks to perform before operating the appliance.
Recommended checks to perform after the appliance has been used.
Information on proper disposal and recycling of the unit.
Solutions for remote control signal loss or malfunction.
Troubleshooting steps for lack of airflow from the indoor unit.
Solutions when the appliance fails to turn on or operate.
Troubleshooting steps for issues with the indoor unit's display screen.
Explains mist, temperature adjustment problems, and inefficient cooling/heating.
Troubleshooting for odors, sudden abnormal operation, and normal noises.
Lists specific error codes and recommended actions.
Highlights severe issues requiring immediate shutdown and professional service.
Illustrates required clearances around indoor and outdoor units.
Lists all necessary tools for the installation process.
Guidelines for choosing optimal indoor and outdoor unit locations.
Specific placement considerations for the outdoor unit.
Safety and technical requirements for electrical wiring.
Explains the critical importance and method of proper grounding.
Steps to install the mounting frame and create the piping hole.
Steps for connecting the outlet pipe and drain hose.
Guide to connecting the refrigerant pipes to the indoor unit.
Details on connecting indoor unit wiring and ambient sensor.
Instructions for bundling pipes and hanging the indoor unit.
Steps to fix the support and connect the drain for the outdoor unit.
How to fix the unit and connect refrigerant pipes between units.
Details outdoor unit wiring and guidelines for pipe arrangement.
Step-by-step guide for performing vacuum pumping on the system.
Methods for detecting refrigerant leaks using detectors or soapy water.
List of checks to ensure a correct and safe installation.
Checks before testing and basic operation mode verification.
Conducting pressure, temperature, and amperage tests for performance verification.
Details pipe length limits and refrigerant calculation for extensions.
Step-by-step guide for properly expanding refrigerant pipes using an expander.
To Next Page
