EasyManua.ls Logo

OUT KOCH - Step 1: Position and Mark Mirror; Step 2: Measure and Mark Points

OUT KOCH
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bringe den Spiegel in die gewünschte Position und markiere dir einen Punkt mittig auf einer Seite des Spiegels. / Bring the mirror into the desired position and mark a
point in the middle of one side of the mirror.
Entferne den Spiegel und markiere zwei Punkte auf einer gedachten Linie. Der erste Punkt sollte12 cm und der zweite 68 cm von der ersten Markierung entfernt sein. /
Remove the mirror and mark two points on an imaginary line. The first point should be 12 cm and the second 68 cm from the first mark.
1
2
12 cm
68 cm

Related product manuals