Step 6: Secure guy lines
1) Secure screen house using all guy lines and stakes.
Step 5: Fasten hooks and stake screen house
1) Clip the plastic hooks on the screen house to the fibreglass pole frame.
2) Stake down the screen house by inserting a stake through the stake loops, located along the
perimeter of the screen house.
3) Position the poles so the sod cloth around the perimeter of the screen house is taut but
remains on the sod. Make certain the perimeter is even and squared.
4) Hammer the stakes into the ground at a
45° angle using a hammer or mallet.
Screen house appears as shown.
Step 9: Packing the screen house
1) Spread screen house flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag and skin forcing air through
unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Screen house must be clean and dry before
storage. Do not store on concrete floor.
Be certain campfires are extinguished.
Dispose of garbage appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 7: Fully assembled
Screen house must be secured for proper function.
Step 8: Disassembly
1)
To take down the screen house, disassemble
in reverse order.
2) Be sure to leave doors and windows
unzipped to avoid zipper damage.
3) Remove stakes with hammer or stake
puller. DO NOT pull on tent.
4) Carefully disengage poles from pins. Push
poles away from you through the sleeves
to minimize risk of damage to tent or poles.
5) Keep poles and stakes together in bags
provided.
CTC161212SH 05/15
To Next Page
Loading...
Need help?
General
