Need help?Do you have a question about the Outdoor GreatRoom Company Key Largo and is the answer not in the manual?
General| Product Name | Key Largo |
|---|---|
| Manufacturer | Outdoor GreatRoom Company |
| Category | Indoor Fireplace |
| Log Material | Ceramic Fiber |
| Burner Material | Stainless Steel |
| Gas Inlet Size | 1/2" NPT |
| Ignition Type | Electronic Ignition |
| Gas Type | Natural Gas or Liquid Propane |
Lists essential items like knives, wrenches, gloves, and batteries for assembly.
Advises that a minimum of two people are recommended for assembly and installation.
Steps for removing the access door and all components from packaging.
Guidance on moving the base to its location and maintaining clearance to combustibles.
Instructions to assemble the fire pit table components as shown in diagrams.
Remove the top and lift the burner to expose the control valve for connection.
Securely connect the incoming gas hose to the valve and burner, avoiding Teflon tape on flare fittings.
Notes on LPG installations and where to find Natural Gas hookup information.
Ensure the gas valve is in the OFF position before starting igniter installation.
Unscrew sparker cap/hex nut and insert the AAA battery into the igniter.
Attach the spark wire and grounding wire to the igniter box and burner.
Test for continuous spark, check gas connections for leaks, and replace burner/top.
Position the tank for safe fuel shut-off and ensure clearance for the door.
Confirm hose clearance and correctly install the access door with its magnets.
Scatter decorative glass or substrate evenly on the burner surface.
CRITICAL WARNING: Do not operate the fire pit without decorative substrate present.
Consult manual for detailed instructions and consult a technician if unsure.
WARNING: Before operating, all gas connections must be fully checked for leaks.
Information on the 1-year manufacturer's warranty and how to register the product.
To Next Page
