Outsunny 84D-030 - User Manual

To Next Page

EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

FR_IMPORTANT:A LIRE ATTENTIVEMENT ET À CONSERVER POUR CONSULTATION

ULTÉRIEURE.

ES_IMPORTANTE, LEA Y GUARDE PARA FUTURAS REFERENCIAS.

PT_IMPORTANTE, RETER PARA REFERÊNCIA FUTURA: LEIA ATENTAMENTE.

DE_WICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTER NACHSCHLAGEN AUFBEWAHREN.

IT _ IMPORTANTE! CONSERVARE IL PRESENTE MANUALE PER FUTURO RIFERIMENTO E

LEGGERLO ATTENTAMENTE.

US_CAUS_CA

IN221100479V01_GL_84D-030_84D-030V01_84D-031V01

EN_Tips:Please do not use in strong winds

to avoid damage.When not in use,please

remove the umbrella and store it to keep dry.

FR_Conseils : Évitez les dommages,

veuillez ne pas utiliser par vent fort.

Lorsqu'il n'est pas utilisé, veuillez retirer le

parasol à temps et conservez-le au sec.

ES_Consejos: evitar daños; por favor, no

use cuando hace viento. Cuando no esté en

uso: por favor retire el paraguas a tiempo, y

guárdelo para mantenerlo seco.

PT_Dicas:Por favor não utilizar em ventos

fortes para evitar danos. Quando não

estiver a ser utilizado, por favor retire o

guarda-chuva e guarde-o para se manter

seco.

DE_Tipps: Um Schäden vorzubeugen,

nutzen Sie das Produkt bitte nicht bei

starkem Wind. Wenn nicht in Benutzung,

klappen Sie den Schirm bitte zeitnah ein

und lagern Sie ihn an einem trockenen Ort.

IT_Suggerimenti: evitare danni, si prega di

non utilizzare quando fuori C' è vento.

Quando non in uso, si prega di rimuovere

I'ombrello tempestivamente e conservare

per tenerlo asciutto.

Need help?

Do you have a question about the Outsunny 84D-030 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Customer Support and Regional Information
Safety and Important Notes

This document serves as a user manual for an Outsunny umbrella, identified by model numbers 84D-030, 84D-030V01, and 84D-031V01. The manual provides essential information for the safe and effective use, maintenance, and storage of the umbrella, along with customer service contact details for various regions.

Function Description:

The Outsunny umbrella is designed to provide shade and protection from the sun. It features a collapsible design for easy storage and deployment. The primary function is to offer a shaded area for outdoor activities, enhancing comfort and protection from direct sunlight. The umbrella is operated manually, with a crank mechanism for opening and closing, as indicated by the visual instructions.

Important Technical Specifications:

While specific dimensions and materials are not explicitly listed in the provided pages, the manual implies a standard outdoor umbrella design. The product is manufactured in Ningbo City, Zhejiang Province, China, and imported by various regional distributors. The model numbers (84D-030, 84D-030V01, 84D-031V01) suggest variations or updated versions of a similar core product. The umbrella includes components labeled 'A' and 'B' in the assembly diagrams, which represent the main canopy and the base/pole assembly, respectively. The crank mechanism is a key operational feature, allowing users to extend and retract the canopy.

Usage Features:

Deployment: The umbrella is opened by rotating a crank handle, as shown in step 01 of the assembly instructions. This mechanism allows for controlled and gradual opening of the canopy.
Adjustment: Step 02 highlights an important usage feature: the ability to adjust the pointed line of the umbrella if the two sides are not balanced when fully open. This suggests a mechanism for fine-tuning the canopy's tension or alignment to ensure even spread and stability.
Portability/Storage: The manual emphasizes the importance of removing and storing the umbrella when not in use, particularly in strong winds, to prevent damage and keep it dry. This indicates a design that allows for relatively easy disassembly or folding for storage.
Weather Conditions: A critical usage feature is the explicit warning against using the umbrella in strong winds to avoid damage. This underscores the product's intended use in moderate weather conditions.

Maintenance Features:

Storage for Longevity: The primary maintenance instruction is to store the umbrella in a dry place when not in use. This prevents moisture damage, mildew, and extends the product's lifespan.
Protection from Elements: Removing the umbrella during strong winds is a key protective measure, preventing structural damage to the canopy and frame.
Cleaning (Implied): Although not explicitly stated, the recommendation to keep the umbrella dry implies that regular cleaning to remove dirt and debris would also be beneficial for maintenance, followed by thorough drying before storage.
Regular Inspection (Implied): The adjustment feature for unbalanced sides (step 02) suggests that users should periodically inspect the umbrella for proper alignment and function, addressing any imbalances to maintain optimal performance and prevent undue stress on the frame.

Customer Support and Regional Information:

The manual provides comprehensive customer service contact information for various regions, including the United States, Canada, United Kingdom, Germany, France, Spain & Portugal, and Italy. This includes phone numbers and email addresses for each region, facilitating support for users worldwide. The regional importer addresses are also listed, which is useful for warranty claims or product returns.

Safety and Important Notes:

The manual consistently uses "IMPORTANT" warnings across multiple languages, urging users to read the instructions carefully and retain the manual for future reference. This highlights the manufacturer's emphasis on user safety and proper product handling. The warnings about strong winds are paramount for preventing accidents and product damage.