Outwell CREST - How to Operate the Appliance; Assembly and Connection; Control Knob Operation

6
a. b. c.
d.
1.
2.
HOW TO OPERATE THE APPLIANCE
3.
Valve tab
Slot
OFF OFF
OFF
OFF
IGNITION IGNITION
IGNITION
IGNITION
Once you have removed the appliance from all packaging you can fit the removable non-stick grill into the
correct position.
Now fit the heat shield into its position.
Open the gas cartridge compartment to fit your gas cartridge.
Visually inspect the gas cartridge before you fit it to your appliance. Ensure that the nozzle is undamaged
and in good condition. If the gas cartridge is damaged in any way do not attempt to fit it to your appliance.
The control knob must be in the OFF position before connecting to the gas cartridge.
Insert the gas cartridge into the holder so that the valve tab is aligned with the slot in the cartridge rim.
Close compartment. With the gas cartridge now in place slide the locking lever down and into Lock position.
a.) Ignite the burner by turning the control knob anticlockwise towards IGNITION until you hear a click.
The clicking sound is the ignition and the burner should now ignite.
Use the control knob to regulate the flame.
b.) To turn the flame up, turn the control knob anticlockwise towards the big flame symbol.
c.) To turn the flame down, turn the control knob clockwise towards the small flame symbol.
d.) To turn the unit completely off the control knob must be in the OFF position.
Unlock
Lock