Turn On:
The analog circuits in the preamp are
activated by either inserting stereo
headphones into the headphone jack or
by connecting your guitar to an amp or PA
with a 1/4" instrument cable.
Turn on the preamp's digital functions and
display window by pressing and holding
the
(Play/Stop) button for two
seconds. Upon release, the player will boot
and bring you to the MAIN MENU.
Please note that the preamp is programmed
to save battery power by tuning off the
display after about 10 seconds. As soon as
you touch any of the player functions, the
display will illuminate again. The analog
preamp functions are not affected.
Press & Hold
Insert
Or
Then
Scroll the screen cursor (A) by moving the
joystick (B) up or down until it highlights
the TUNER selection on the menu. Then
navigate to the tuner by moving the joystick
to the right or by pushing in.
Play any string on the guitar. The note name
will appear in the display. If the string is not
in tune, an up or down arrow will also appear
indicating the direction to adjust the string
pitch. When both arrows illuminate, you're in
tune. When done, simply move the joystick to
the left to return to the MAIN MENU.
Please note that moving the joystick to
the right moves you to the next submenu,
while leftward movement returns you to
the previous menu.
Tune In:
To Main Menu
Next
A
B
To Next Page
Loading...
