Using the Controller
Use your electric throw blanket with Detachable Controller only.
Turn controller to the “ON” position on the right-hand side. It will enter standby and display 0
for time and temperature.
Use the Temp and Time buttons to set the temperature and time, or press High to preheat. If
preheating, the display will show H, which will switch to L after one hour.
Auto Off
The controller can be programmed with a 1-9 hour automatic shutoff timer.
Electrical Field Effect
When using the electric throw blanket, some people may be susceptible to a tingling
sensation when alone or when touching someone else using the electric throw blanket.
This sensation is caused by the current flowing through the element, creating an
Electromagnetic Field (EMF), and is common among similar products. Some people are
more susceptible to feeling this tingling sensation than others. This is no cause for concern
and is in no way an electric shock.
To Next Page
Loading...