Why is my Ovutek Scales reading inaccurate?
If your Ovutek Scales reading is inaccurate, it might be due to the scale not being on a level surface. Ensure you place the scale on a level surface. Also, the scale may not have been cleared properly. To resolve this, remove the batteries for 45 seconds, and then replace them to reset the scale.
How to fix Ovutek Scales that won't turn on?
If your Ovutek Scales do not turn on, there could be several reasons. First, check if a battery is installed. If not, get the included battery from the package and install it by matching the + and - terminals according to the guide in the battery box. Second, the batteries might be dead, in which case you should replace them. Finally, ensure that the batteries are properly installed, matching the correct polarity as marked on the battery compartment.
Covers essential safety guidelines for using the scale, including handling and placement.
Step-by-step guide on how to accurately weigh yourself and interpret readings.
Instructions on re-measuring if the initial weight reading is inaccurate or shows errors.
Instructions for using the scale to weigh babies or pets and calculate weight difference.
To Next Page
General