Forget Memorized Wi-Fi Networks
Remove the Sensor from the Base Station.
Disconnect the power cord from the Base Station
Press and hold the Base Station button while re-inserting the power cord
into the Base Station.
Hold the Base Station button until the light glows orange and you hear 4
beeps (this can take up to 10 seconds).
Tap the Base Station button 3 times.
Confirm the Wi-Fi light on the bottom of the base is o
You will hear 4 beeps, which will indicate the memorized Wi-Fi Networks
have been forgotten.
! NOTE.
If the sequence is recognized, the Wi-Fi light on the
bottom of the Base Station will turn o.
! NOTE.
If you do not hear beeps, wait 5 seconds and try again
starting from step 1.
Factory Reset
A factory reset of BabySat will erase all information stored on the device and
restore BabySat soware to its original settings
Disconnect the power cord from the Base Station
Press and hold the Base Station button while re-inserting the power cord
into the Base Station
Hold the Base Station button until the light glows orange and you hear 4
beeps (this can take up to 10 seconds)
Tap the Base Station button 4 times
You will hear 4 beeps, which will indicate BabySat has been reset.
CAUTION.
A factory reset will completely reset the Base Station and
Sensor. You will no longer be able to receive readings, Push
Notifications or alarms until BabySat is set up again.
! NOTE.
A factory reset will not remove your data from the
cloud server.
! NOTE.
If you do not hear beeps, wait 5 seconds and try
again starting from step 1.
44
To Next Page
Loading...