17 Electro-Magnetic Compatibility
17.1 Electro-Magnetic Compatibility
BabySat is intended for use in the electromagnetic environments of typical
homes. The user of BabySat should assure that it is used in such an
environment. BabySat contains BLE and Wi-Fi modules which intentionally
transmit and receive RF electromagnetic energy in the 2.4GHz frequency
band. Observe the function of other equipment in the vicinity to ensure
BabySat does not interfere with the function of other devices. Move BabySat
Base Station further away from any aected device if interference is
observed.
WARNING!
Portable RF communications equipment (including
peripherals such as antenna cables and external antennas)
should be used no closer than 30 cm (12 inches) to any part
of BabySat, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this
equipment could result.
WARNING!
Use of this equipment adjacent to or stacked with other
equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that
they are operating normally.
WARNING!
Use of accessories, transducers and cables other than those
specified for use with BabySat as described in this document
can result in incorrect readings, degraded performance, or
injury.
17.2 Emissions
Emissions Test
Compliance
Electromagnetic
environment -
guidance
RF emission
CISPR 11
Conducted emissions
CISPR 11
Harmonic emission
IEC 61000-3-2
V
oltage fluctuations
/
flicker emission
IEC 61000-3-3
Group 1
Class B
Class
A
Compliant
BabySat uses RF energy only for
its internal functions. Therefore,
its RF emissions are low and are
not likely to cause any
interference in nearby electronic
equipment.
Suitable for use in all
establishments, including
domestic environments and
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
63
To Next Page
Loading...