Owon PCT513-TY - Page 17

17
HVAC Control Board
W
C G
Y R
Power module
R
Y
G
W
Step 6. Position the wiring module
The power module should be installed between your thermostat wiring and
your control board. Install it at the right position then close the HVAC cover
panel securely and return to your thermostat.
Step 5. Connect the wires
Generally, the control board will have W, C, G, Y and R terminals. Connect
the pre-wired side of the power module (5 terminals) to the corresponding
terminals on the HVAC control board.
To HVAC control board
To thermostat